Payment Type: | L/C, T/T, Western Union |
---|---|
Min. Order: | 20 |
Model No.: 201, 304
Product | Stainless Steel Coil,stainless steel sheet,stainless steel circle. |
Technique | cold rolled or hot rolled |
Grade | 201 J1,J3,304,410,430,420 j2. |
Thickness | 0.15mm-3.0MM |
Width | 150mm-2500mm or as your requirement |
Length/Diameter | as your requirement |
Surface Treatment | No.1,2B,No.4,BA,2B,hairline,8k |
Edge | mill edge or slit edge |
Hardness | Soft, Semi-DDQ, DDQ (Deep drawing quality) |
Application | Stainless Steel Sheets are widely used in below fields: 1: Construction field, shipping building industry 2: Petroleum and Chemical Industries 3: Food and Mechanical Industries |
Quality control | Mill Test Certificate is supplied with shipment |
Export | Southeast Asia, Mid East, Africa, Eastern Asia, Western Europe and So on. |
Surface | Characteristics |
2B | The surface brightness and flatness of no2B is better than no2D. then through a special surface treatment to improve its mechanical properties,No2B could nearly satisfy comprehensive uses |
BA | Cold rolled, bright annealed and skin-passed, the product have excellent brightness and good reflexivity like mirror,kitchen apparatus,ornament etc. |
8K | The product have excellent brightness and prefer reflexivity can to be the mirror. |
NO.4 | Polished with abrasive belt of grit #150-#180,have better brightness with discontinuous coarsestria,but thinner than No3, are used as bathtub buildings inner and external ornaments electrical appliances kitchen utensils and food processing equipment etc. |
NO.1 | The surface is finished by heat treatment and pickling or processes corresponding thereto after hot rolling |
HL | Polished with abrasive belt of grit #150-#320 on the NO.4 finish and has continuous streaks, mainly used as buildings ornaments elevators,door of building, frontal plate etc. |
Chemical Composition | 201 | 202 | 301 | 304 | 316 | 430 |
C | ≤0.08 | ≤0.06 | ≤0.06 | ≤0.06 | ≤0.08 | ≤0.12 |
S | ≤0.02 | ≤0.02 | ≤0.03 | ≤0.03 | ≤0.03 | ≤0.03 |
P | ≤0.075 | ≤0.06 | ≤0.045 | ≤0.035 | ≤0.045 | ≤0.04 |
Mn | 8.5-10.5 | 8.5-10.5 | ≤2.0 | ≤2.0 | ≤2.0 | ≤1.0 |
Si | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 | ≤1.0 |
Cr | 14-15 | 14-16 | 16-18 | 17-20 | 16-18 | 16-18 |
Ni | 0.8-1.2 | 4--6 | 4--7 | 8--12 | 12--16 | ≤0.05 |
Quality | Grade | NI | CU | Application |
High copper DDQ material | 201 | 1.3-1.5% | 1.2-1.5% | Sink, Deep drawing product, Pot, Bowl |
Half copper DDQ material | 201 | 0.8-1.0% | 0.75-1.0% | sink,Deep drawing products,deepth 14 inches below |
low copper semi-DDQ | 201 | 0.7 around | 0.7around | plate,bowl etc |
Address: Room 801/901-1-4# .QingDaBoYa Yuan, Shuang Jiang Road. ShuangJie Town, BeiChen District, Tianjin China |
Tel: 086-22-26825798/22-86899922 |
Fax: 086-22-26825799 |
Attn:Mr kong Mobile:86-18515220036 |
Product Categories : Stainless Steel Sheet/Plate